Features
-Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
-Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
-Automatically charging ending with negative delta V
-Worldwide usage with 120-240V AC
Accessories Included
1 standard Tamiya connector with Temperature Sensor
1 adapter from standard Tamiya to Mini Tamiya
1 adapter from standard Tamiya to a pair of alligator clip
Charger Specification
Input: AC 100-240V
Output: 6-12V, 1A or 2A
Operation Instruction
-Don’t charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
-Battery pack must be made by high drain current cell
-Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse
Caution
The charger is designed for indoor use only. Don’t leave the charger unattended during charging
The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods
Don’t cover the charger when charging, ambient temperature shall not be more than 40oC
Don’t leave the batteries and chargers on wood surface or carpet.
Cut off the power supply before connect or disconnect the charger with batteries
WARNING – DO NOT CHARGE LiPO Batteries
-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.
-Caution: LiPO battery packs may often have two sets of leads/connectors – do not charge if identified as LiPO battery.
Failure to follow these warnings may result in fire or personal injury.
Contact our customer support team if you are unsure if your battery can be charged.
FAST CHARGE – NiCd/NiMH battery pack charger that provides 1Amp or 2Amp options. Quickly charge your battery packs; 1Amp is recommended for 1000-1800mAh packs, and 2Amp is recommended for any pack over 2000mAh.
UNIVERSAL SMART CHARGER – Charges battery packs based on automatic voltage detection. Charges your NiMH or NiCd battery packs that are 6V, 7.2V, 8.4V, 9.6V 10.8V, and 12V battery packs.
EASY TO USE – A great airsoft battery charger or RC car battery charger with simple LED indicators for charging status. Green light for fully charged and red light for charging.
HOBBY BATTERY CHARGER – Charge NiMh/NiCd battery packs for Airsoft, RC Cars, or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, standard Tamiya to Alligator Clips adapter.
TENERGY SAFE – To give you peace of mind, Tenergy’s chargers meet rigorous American UL 60950-1 safety standards. For added security, the charger also includes a temperature sensor to prevent over-heating while charging.
